[PIE] LOOP CALIBRATOR PIECAL 535

HOME >

자.관련상품보기

전압전류교정기

[PIE] LOOP CALIBRATOR PIECAL 535

판매가: 견적문의

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비

0원 조건별배송

택배

/ 주문시결제(선결제)

방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층

상품코드: 2144

모델명: PIECAL 535

브랜드: PIE

제조사: PIE

원산지: 미국

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

[PIE] LOOP CALIBRATOR PIECAL 535

mA Dual Range Loop Calibrator

제품특징

True ± 0.025% of reading

Read and Source 0.000 to 50.000 mA

Display current or -25.00 to 125.00% of 4-20mA or 10-50mA

Bar graph displays % of 4-20mA or 10-50 mA

Read 0.00 to 60.00 volts with 2X over range ability

Simulate 2-Wire Transmitters

Power 2-Wire Transmitters and Read 0.000-50.000mA

Read 0.00 to ± 30.00 VDC with 4X over range ability

Source 0.000 to 24.000 VDC with up to 20mA output

Direct Calibration 1.000V to 5.000V

Loop Compliance Voltage ≥ 43 Volts

Optional Analog Output for chart recorders & Data loggers

Auto Step or Ramp with HIGH accuracy and repeatability designed in collaboration with Nuclear plants

Selectable step sizes, time in-between steps & soak time

Stop watch like EZ-Check switch

Full 5 Digit Display

Fuseless protection from accidental connection to 240 volts AC/DC

Rugged handheld enclosure with optional lanyard and Velcro hand strap

Uses 4 AA alkaline batteries

Superior battery life of 40 hours under typical continuous usage

Easy access to battery compartment

제품사양

Specifications
Function		Description
Common Specifications for all Current Modes
Ranges		0.000 to 24.000 mA, -25.00 to 125.00% of 4-20 mA
		0.000 to 52.000 mA, -25.00 to 105.00% of 10-50 mA
Accuracy		≤ ± (0.025 % of reading + 0.004 mA)
Temperature Effect		≤ ± 50 ppm/°C of range
Resolution		0.001 mA and 0.01 %
Step/Ramp Timebase		0.01% of 4.9152 MHz
Source/Power and Measure 2-Wire Transmitter Specifications
Loop Compliance Voltage		≥ 43 Volts
Loop Drive Capability		1200 Ω at 20 mA/800 Ω at 50 mA for entire battery life
Miscellaneous		Open loop or out of compliance conditions are indicated by appropriate error display
		Battery life in: Source mode ≥ 18 hrs at 12 mA/≥ 9 hrs at 30 mA nominal (100 Ω load) Power measure ≥ 10 hrs at 12 mA/≥ 5 hrs at 30 mA nominal (100 Ω load)
		Selectable EZ-Step(s) for Source Mode/2-Wire Transmitter Simulation: 2 to 16 selectable step settings (Step size is determined by the selected high & low ranges)
		Selectable time settings for stepping and soak: STEP: 5 to 900 seconds SOAK: 0 to 900 seconds
Voltage Specifications
Read	Range	0.00 to 30.00 VDC (with 4X over range)
	Resolutions	0.01 VDC
	Temperature Effect	≤ ± 200 ppm/°C of range
	Input Resistance	≥ 1 MΩ
	Accuracy	0.00 to 30.00 VDC ≤ ± (0.1 % of reading ±0.1 V)
Source	Range	0.000 to 24.000 VDC
	Output Resistance	≤0.3 Ω
	Source Current	≥20.000 mA
	Accuracy	≤±(0.025%RDG + 0.004 V) ±50ppm/°C of range
Read mA Specifications
Voltage Burden		≤ 2V
Overload/Current Limit Protection		≤ 24 mA (4-20 range)/ ≤ 52.5 mA (10-50 range) nominal
Battery Life		≥ 40 hours typical
2-Wire Transmitter Simulation Specifications:
Overload/Current Limit Protection		≤ 24 mA (4-20 range)/ ≤ 52.5 mA (10-50 range) nominal
Loop Voltage Limits		2-90 VDC
Miscellaneous		Open loop or out of compliance conditions are indicated by appropriate error display
		Battery life ≥ 40 hour typical
		Selectable EZ-Step(s) for Source Mode/2-Wire Transmitter Simulation: 2 to 16 selectable step settings (Step size is determined by the selected high & low ranges)
		Selectable time settings for stepping and soak: STEP: 5 to 900 seconds SOAK: 0 to 900 seconds
General Specifications: (Unless otherwise indicated all specifications are rated from a nominal 23 °C, 70 % RH for 1 year from calibration)
Temperature Range	Operating	-20 to 60 °C (-5 to 140 °F)
	Storage	-30 to 60 °C (-22 to 140 °F)
	Relative Humidity Range	10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing
		10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing
Size		7.00 X 3.30 X 2.21 inches (177.8 x 83.8 x 56.1mm)
Weight		14.0 oz (397 grams)
Battery		4 AA Alkaline, 120 VAC 50/60 Hz AC adaptor included
		Optional 120 VAC 50/60 Hz AC adaptor available
Miscellaneous		Low battery indication with nominal 1 hour of operation left
		Over-voltage protection to 120 Vrms (rated for 30 seconds) or 240 Vrms (rated for 15 seconds)
		Bar graph display with 1% resolution of 4-20 mA signal scale
		High contrast graphic liquid crystal display with 0.45" (11.4 mm) high digits