[PIE] LOOP CALIBRATOR PIECAL 334

HOME >

자.관련상품보기

전압전류교정기

[PIE] LOOP CALIBRATOR PIECAL 334

판매가: 가격문의

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비

0원 조건별배송

택배

/ 주문시결제(선결제)

방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층

상품코드: 2139

모델명: PIECAL 334

브랜드: PIE

제조사: PIE

원산지: 미국

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

[PIE] PIE 334 4-20mA Loop Calibrator

Precision milliamp loop calibrator

제품특징

The Piecal 334 is functionally equivalent to similar calibrators with four digit displays, knobs and switches. Improvements over 334s from other manufacturers include better long term stability, accuracy, reliability and ruggedness plus improved battery life.

The Piecal 334 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. The Piecal 334 is the perfect replacement for your worn out milliamp calibrators.

Calibrate Milliamp Instruments

Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA

Read 0.00 to 52.00 mA, -99.99 to 99.99 V

Simulate 2-Wire Transmitters

Power & Read 2-Wire Transmitters

Calibrate with confidence

Accurate to ±0.025% of Span at 4.000 & 20.000 EZ-CHECK outputs

Use in the Plant, Field or Shop

Includes Rubber Boot and Attached Test Leads

Low profile switches resist accidental damage

Simple Battery Changes

Separate compartment for no-tool battery changes

Four inexpensive “AA” batteries

Functional Replacement for the Altek 334 & Altek 334A

제품사양

Specifications
Read mA
Ranges		0.00 to 52.00 mA Full Span OR -25.0 to 300.0% of 4-20 mA
Accuracy	Below 24.01mA	≤ ± 0.05 % of 24.00mA (± 0.01mA)
	Above 24.00mA	≤ ± 0.05 % of 52.00mA (± 0.02mA)
Voltage burden		≤ 2V at 50 mA
Overload/Current limit protection		54 mA nominal
Battery life		≥ 125 Hours nominal
Source/Power & Measure Two Wire Transmitters
Loop compliance voltage		≥ 24 V DC @ 20.00mA
Loop drive capability		1200 Ω at 20 mA for 15 hours nominal
Battery life		Source and Power measure mode ≥ 30 hrs at 12 mA nominal
2-Wire Transmitter Simulation
Voltage burden		≤ 2V at 20 mA
Overload/Current limit protection		24 mA nominal
Loop voltage limits		2 to 100 V DC (fuse-less protected from reverse polarity connections)
Battery life		≥ 125 hours nominal
Voltage Read
Range and Resolution		-99.99 to +99.99 V DC Full Span (FS)
Accuracy		≤ ± 0.05 % of FS
Temperature effect		≤ ± 100 ppm/°C of FS
Input resistance		≥ 2 MΩ
Battery life		≥ 125 hours nominal
General
Temperature Range	Operating	-20 to 60 °C (-5 to 140 °F)
	Storage	-30 to 60 °C (-22 to 140 °F)
	Relative Humidity Range	10 % ≤ RH ≤90 % (0 to 35 °C), Non-condensing
		10 % ≤ RH ≤ 70 % (35 to 60 °C), Non-condensing
Size		L=5.63 x W=3.00 x H=1.60 inches
Weight		12.1 ounces (including boot & batteries)
Batteries		Four “AA” Alkaline 1.5V (LR6)
Low Battery		Low battery indication with nominal 1 hour of operation left
Protection against misconnection		Over-voltage protection to 135 V rms (rated for 30 seconds) or 240 V rms (rated for 15 seconds)
Display		High contrast graphic liquid crystal display with 0.413” (10.5 mm) high digits