[CHINA] 마그네틱로크웰경도계 PHR-100

HOME >

가.관련상품보기

경도계

로크웰경도계

[CHINA] 마그네틱로크웰경도계 PHR-100

판매가: 견적문의

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비

0원 조건별배송

택배

/ 주문시결제(선결제)

방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층

상품코드: 479

모델명: PHR-100

브랜드: CHINA

제조사: 중국

원산지: 중국

파라미터: 로크웰

디스플레이: 아날로그

구분: 휴대용

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

Magnetic Rockwell Hardness Tester

Features of Magnetic Rockwell Hardness Tester

1. The magnetic Rockwell hardness tester has its testing head fixed onto the surface of steel workpieces through a magnetic absorbing disc, and accomplishes testing upon single side touch, with no need of sampling, removing or supporting the workpiece.
2. Working on practicable Rockwell hardness testing principle, the magnetic hardness tester has high testing precision, in compliance with ISO6508.2 standard. Also, its test error is no more than 1.5HRC tested, by the National Institute of Metrology.
3. It is fast, convenient, and of no damage.
4. A drum reading device is utilized for convenient reading, high repeatability and precision.
5. The magnetic Rockwell hardness tester is equipped with a magnifier with lamp, so that you can see the distinct reading in the darkness of the workshop.
6. The magnetic hardness tester is extensively applicable to the hardness measurement of flat components, curved components with the diameter more than 50mm, large workpieces, assembled parts, non-slicing and not easily movable parts.
7. It can also be used for on site precision hardness testing for steel plate, steel tubes, axles, moulds, large forgings, and a variety of large and medium-sized heat treated parts.
8. The magnetic Rockwell hardness tester is adopted to test the hardness of welding seam, heat-affected zone and parent metal in the finished pressure vessels.
9. The PHR-100X hardness tester is applied to striped parts like small machine tool guide way.
10. During production inspection and acceptance inspection, the magnetic Rockwell hardness tester is used in place of Leeb hardness tester.
11. Traceable standard hardness block, and qualified indenter examined by standard Rockwell hardness tester.
12. The dynamometer, used to calibrate load, is traceable to the national secondary standards.

Technical Parameters of Magnetic Rockwell Hardness Tester

Initial test force	10kg
Total test force	60kg, 100kg, 150kg
Indenter	120° diamond cone 1.588mm carbide ball
Indication error	Meets the requirements of ISO6508
Repeatability error	Meets the requirements of ISO6508
Resolution	0.5HR
Maximum magnetic attraction	370kg
Workpiece size	(Flat workpiece)≥60mm×180mm(PHR-100), ≥20mm×180mm(PHR-100X) (Curved workpiece) diameter≥50mm Thickness ≥5mm
Application scope	Three scales, i.e. HRA, HRB and HRC. The magnetic Rockwell hardness tester is used for steel workpieces with high magnetic conductivity.

Standard Package
Tester 120°diamond indenter
1.588mm carbide ball indenter
Rockwell hardness block
Flat anvil
Magnifier with lamp
Carrying case

Optional Accessories
120°diamond indenter
1.588mm carbide ball indenter
Rockwell hardness block (HRA, HRB, HRC high, HRC medium, HRC low)
Magnifier with lamp

Model Selection

Model	Workpiece Size (mm)	Net Weight (kg)	Packaged Weight (kg)	Packing Size (mm × mm × mm)	Remark
PHR-100	Flat workpiece ≥60 × 180; Diameter of curved workpiece ≥50; Thickness ≥5	4.9	10.0	480 × 390 × 210
PHR-100x	Flat workpiece ≥20 × 180 ; Diameter of curved workpiece ≥50; Thickness ≥5	5.5	10.8	480 × 390 × 210	The PHR-100x magnetic hardness tester is applicable to striped parts,the assembled striped machine tool guide ways, for example.