[CHINA] 수퍼피셜로크웰경도계 PHR-1S

HOME >

가.관련상품보기

경도계

로크웰경도계

[CHINA] 수퍼피셜로크웰경도계 PHR-1S

판매가: 견적문의

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비

0원 조건별배송

택배

/ 주문시결제(선결제)

방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층

상품코드: 480

모델명: PHR-1S

브랜드: CHINA

제조사: 중국

원산지: 중국

파라미터: 수퍼피셜

디스플레이: 아날로그

구분: 휴대용

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

Portable Superficial Rockwell Hardness Tester

Features of Portable Superficial Rockwell Hardness Tester

1. This superficial Rockwell hardness tester is a kind of low-load portable hardness tester.
2. The small portable superficial Rockwell hardness tester works on the same testing principle with high accuracy as the bench type tester, in compliance with the ISO6508.2 and ASTM E110 standards.
3. Consisting of the tester and bench stand, the portable superficial Rockwell hardness tester can either be used on the desk or on the shop floor.
4. With more economical costs and easier operation, the small portable superficial Rockwell hardness tester can be used to replace the Vickers hardness tester.
5. It is used to test the hardness of metal sheet or the superficial layer of metal, by means of low test force.
6. With slight indentation, the superficial Rockwell hardness tester accomplishes non-destructive inspection, producing no undesirable effect on most workpieces.
7. It is applicable to thin and small parts, such as thin plate, slim tubes and axles, small stamping parts and parts with small supporting surface, etc.
8. The small portable superficial Rockwell hardness tester is also adopted for hardness testing of thin carburized layer or nitrided case.
9. The hardness tester is installed with traceable standard hardness block, and qualified indenter.
10. The load gauge for test force calibration can directly be traced to the national secondary standards.

Technical Parameters of Portable Superficial Rockwell Hardness Tester

Initial test force	3kg
Total test force	15kg, 30kg, 45kg
Indenter	120° diamond cone< 1.588mm carbide ball
Indication error	Meets the requirements of ISO6508
Repeatability error	Meets the requirements of ISO6508
Resolution	0.5HR
Testing range	15 scales, such as HRN, HRT, HRW, HRX, HRY, and so on.
Application scope	The small portable superficial Rockwell hardness tester is applicable to all common metal, including steel, copper, aluminum, lead, cemented steel, nitrided steel, and more.

Standard Package
Tester
Bench stand
120° diamond indenter
1.588mm carbide ball indenter
Superficial Rockwell hardness block
Flat anvil
V anvil
Extension
Carrying case

Optional Accessories
120° diamond indenter
1.588mm, 3.175mm carbide ball indenter
1.588mm, 6.35mm, 12.7mm ball indenter
Hardness block (HR15N, HR30N, HR45N, HR15T, HR30T, HR45T)
Raised spot anvil
Diamond raised spot anvil
Ball testing anvil
Spare magnifier

Model Selection

Model	Opening Size (W×D) (mm×mm)	Net Weight(kg)		Gross Weight(kg)		Package Dimensions (mm×mm×mm)		Remarks
Model	Opening Size (W×D) (mm×mm)	Tester	Bench Stand	Tester	Bench Stand	Tester	Bench Stand	Remarks
PHR-1S	25×25	0.8	1.5 (Aluminum)	2.6	1.8	330×255×150	232×215×148	The first figure included in the model number signifies the opening width (in inches), and the second, represents the opening depth. When there is only one figure, it means the same width and depth of the opening.
PHR-2S	50×50	1.1	1.5 (Aluminum)	3.6	1.8	390×280×160
PHR-4-2S	100×50	1.5	4.5(Iron)	5.0	4.9	510×375×177