[DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL 이미지 확대 보기
  • [DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL

[DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL

공유
짧은설명
PX-7 DL (데이타저장기능)
판매가
견적문의
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 조건별배송
택배
 / 주문시결제(선결제)
방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층
상품코드
14
모델명
PZX-7/PZX-7DL
브랜드
DAKOTA
제조사
DAKOTA
원산지
미국

상품상세정보

DAKOTA ULTRASONICS PX Series has arrived. The variety of features offered in the PX-7 and PX-7DL allow the user to select a quality tool that will meet or exceed their specific application needs. In the Echo-to-Echo Mode you have the ability to measure the thickness of materials without removing the paint or the coating. Our 5 year limited warranty indicates how we feel about the reliability and durability of the PX SERIES.
The PX-7 is our basic precision gauge model. The PX series are packaged in an aluminum extruded body, with nickel plated aluminum end caps. The PX series gauges are typically used for thin material applications. This gauge has the ability to calibrate to a variety of different materials using a one point calibration option. Some of the features include: Scan feature (allowing the user to scan an area for the minimum thickness), alarm mode (audible & visual), differential mode (+/- from nominal thickness value), and RS232 port out.
Physical
Weight: 10 ounces (with batteries).
Size: 2.5 W x 4.5 H x 1.24 D inches (63.5 W x 114.3 H x 31.5 D mm).
Operating Temperature: -20° to 120°F (-30° to 50°C).
Case: Extruded aluminum body with nickel-plated aluminum end caps. Sealed connectors and end caps.
Keypad
Sealed membrane that is resistant to both water and petroleum products.
9 tactile-feedback keys.
Transducer
Single element with delay tip. 10 to 22 MHz frequency range.
Locking quick disconnect LEMO connector.
4 foot cable.
Power Source
Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours with alkaline and 100 hours with NiCad.
Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
Display
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable: on / off / auto (illuminates only when taking a measurement).
Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
Bar graph indicates stability of reading.
Certification
Factory calibration traceable to national standards.
Automatic Data Logging System 1000 reading capacity, (10 files of 100 readings each file). OBST indicates no reading.
Complete with data acquisition software and cable.
Measuring
Range: Measures from 0.0060 to 1.0000 inch (0.15 to 25.40 millimeters).
Switch to select English or Metric units.
Resolution: 0.0001 inch (0.001 millimeter)
Velocity Range: 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second).
Warranty
5 years limited
Measuring Modes
Interface to Echo, Echo-to-Echo (through paint) and Auto-Switchable.
Four readings per second for single point measurements or 8 per second in Scan Mode-captures the minimum thickness.
Single point calibration.
Features
Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum & maximum acceptable thickness value. If measurement falls outside Hi/Lo limits, red LED will illuminate and sounds beep-er. If measurement is between Hi/Lo limits, green LED will illuminate.
Data Output: RS-232 output sends data to a serial printer, a computer or other external storage device.

배송안내

- 배송비 : 기본배송료는 2,500원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  50,000원 이상 구매시 무료배송입니다.

- 본 상품의 평균 배송일은 0일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]

- 본 상품의 배송 가능일은 0일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)

교환 및 반품안내

- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.

- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)

- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.

- 신발의 경우, 실외에서 착화하였거나 사용흔적이 있는 경우에는 교환/반품 기간내라도 교환 및 반품이 불가능 합니다.

- 수제화 중 개별 주문제작상품(굽높이,발볼,사이즈 변경)의 경우에는 제작완료, 인수 후에는 교환/반품기간내라도 교환 및 반품이 불가능 합니다. 

- 수입,명품 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다.

- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오. 

환불안내

- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.

AS안내

- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

- A/S는 판매자에게 문의하시기 바랍니다.

이미지 확대보기[DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL

[DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL
  • [DAKOTA] 정밀초음파두께측정기 PX-7/PX-7DL (단종) -> PZX-7/PZX-7DL
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동