[DAKOTA] 초음파두께측정기 MX-5 [MX-5DL] (단종) -> ZX-5/ZX-5DL

HOME >

차.관련상품보기

초음파두께측정기

[DAKOTA] 초음파두께측정기 MX-5 [MX-5DL] (단종) -> ZX-5/ZX-5DL

짧은설명: MX-3 + 알람모드, 편차모드, MX-5DL (데이타저장기능)

판매가: 견적문의

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비

0원 조건별배송

택배

/ 주문시결제(선결제)

방문 수령지 : 부산광역시 해운대구 우동1로20번가길 52-5(우동) 1층

상품코드: 8

모델명: MX-5 [MX-5DL]

브랜드: DAKOTA

제조사: DAKOTA

원산지: 미국

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The MX-5 is a simple to use hand-held Ultrasonic Thickness Gauge. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5. The MX-5 comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.

Applications
Corrosion & Pitting	Boilers
Tube & Pipe	Glass
Tanks	Variety of Applications

Specifications
Measuring

Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Switch to select English or metric units.
Resolution: 0.001 inch (0.01 millimeter)
Velocity Range: .0492 to .3937 in/m s 1250 to 10,000 meters/sec
Built-in: Stainless steel reference disk for probe zeroing.
Four readings per second for single point measure ments or 16 per second in scan mode captures the minimum thickness.
Single and Two point calibration option included.
Features: Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
Data Ouput: RS232 output sends thickness readings to a computer or other external storage device


Physical

Weight: 10 ounces
Size: 2.5 W x 4.75 H x 1.25 D inches 63.5 W x 120.7 H x 31.8 D mm
Operating Temperature: -20 to 120F (-20 to 50C)
Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.


Keypad
Sealed membrane that is resistant to both water and petroleum products.
Nine tactile-feedback keys.


Transducer
Dual element (transmit and receive)
1 to 10 MHz frequency range.
Locking quick disconnect LEMO connectors
4 foot cable
Optional cable lengths up to 100 feet.
Custom transducers available for special applications


Power Source

Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.


Display
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable: on/off /auto (illuminates only when taking a measurement)
Measurements displayed in inches, inches/microsecond, millimeters and meters/second.
Bar graph indicates stability or reading.


Certification
Factory calibration traceable to national standards.


Warranty
5 year limited.